Canon Pixma iP6000, iP8500 Reset

1. Turn off the printer.
2. Hold Resume button click POWER.
3. Hold button RESUME release POWER.
4. Then press the button RESUME again .
5. Release all the buttons.
6. Led Indicator in green and stay green.
7. Click RESUME button 4 times , if you want to make another transaction
.8. Turn off the printer POWER button.

• Orange - Service test print 1 times - Orange - Service test print
• Green - EEPROM information print 2 times - Green - EEPROM information print
• Orange - EEPROM initialization 3 times - Orange - EEPROM initialization
• Green - Waste ink counter setting 4 time - Green - Waste ink counter setting
• Orange - Destination setting (Press Power > Press Resume 3x) 5 times - Orange - Destination setting (Press Power> Press Resume 3x)
• Green - Print head deep cleaning 6 times - Green - Print head deep cleaning
• Orange, Green, Orange - Return to menu selection 11-13 times - Orange, Green, Orange - Return to menu selection
• Green - Left margin correction 14 times - Green - Left margin correction

Read More......

Canon Pixma MP450 Reset

• Turn off the printer.
• Hold button Resume/Cancel (red triangle in the circle), click on POWER - an indicator light green.
• Release the button Resume / Cancel keeping POWER.
• Click Resume/Cancel 2 times, keeping POWER, and then release all the buttons.
• When the indicator recorded GREEN - click Resume / Cancel 4 times!
• Turn off the printer POWER button.
• FINISH

Read More......

Canon S900, S820, S750, S520 Reset

Follow this step for complete service

• Turn off the printer.
  
• Press and hold the RESUME button, then press and hold the POWER button.
  
• While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
  
• The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
  
• Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
  1. Service/factory test printout, including ink sensor check
  2. EEPROM info printout
  3. EEPROM initialization
  4. Clear the waste-ink counter
  5. Printer model setting. (more selections beyond this- leave this alone)
  6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Read More......