MP150 Reset
Following is the procedure to reset the wate ink counter for the Canon Pixma MP150
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Turn off the printer.( it must be turn off)
then turn it on again.
Friday, July 11, 2008
MP150 reset Cannon PIXMA
Resetter Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
2.Press and hold the RESUME button, then press and hold the POWER button.
3.Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily. You are now in Service mode.
4.Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
- Service/factory test printout, including ink sensor check
- EEPROM info printout
- EEPROM initialization
- Clear the waste-ink counter
- Printer model setting. (more selections beyond this- leave this alone)
5.After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart
Epson intelligent chip cartridge resetter
The JY168 resetter is capable of identifying and resetting most Epson intelligent ink cartridge on the market. You need to refill the ink cartridge before using the resetter.
Simply line up your Epson OEM or compatible ink cartridge with the notches on the bottom of the resetter (different size notches for the different cartridge designs.) The pins on the JY168 resetter should line up with the contacts of the IC chip on the ink cartridge. Press the resetter's pins to the chip firmly. The LED should blink on and off after pressure is applied for 3 to 5 seconds. Once the LED light starts blinking, the ink cartridge is reset and ready to print.
The JY168 Epson chip resetter will work on the following inkjet cartridges:
T007201, T008201, T009201, T015201, T016201, T017201, T018201, T026201, T027201, T028201, T029201, T036120, T037201, T040, T041, T0421, T0422, T0423, T0331, T0332, T0333, T0334, T0335, T0336, T0241, T0342, T0343, T0344, T0345, T0346, T0347, T0348, etc.
The JY168 Epson chip resetter will work on the following inkjet printer models:
Epson Stylus Photo 780, 785EPX, 790, 810, 820, 870LE, 875DC, 875DCS, 890, 895, 900, 915, 925, 950, 1270, 1280, 1290, 2000P, 2100, 2200
Epson Stylus C41, C42, C42+, C42UX, C42SX, C50, C60, C61, C62, C70, C70+, C80, C82, CX3200, CX5200
Epson Stylus Color 680, 685, 777, 777i
source http://www.misterinkjet.com/epson_resetter_instructions.htm